How to use dvswitch without a static IP address
You Don’t Need a Static IP for Your Node or DVSwitch — Here’s Why
STOP bubble pack Local GMRS traffic from getting into your node.
In some areas there is a lot on unlicensed traffic. In areas like this the standard USB radio will get overridden its why i use a 5 watt radio on…
Modifying CM108 For GMRS/Alstar nodes
The cm108 is a sound card used to build a node or repeater it allows you to connect to a actual radio. You don’t use this if your using a…
GMRS node for DV switch Under $50
You dont have to have an expensive node if all you want to do is use DVSWITCH. You dont need a radio modem so the cost is under $50 depending…
Using node manager to set Morse and Voice IDS
First you need node manager installed. Install with the following commands Drop to a shell and type cd /etc/asterisk/local/ wget https://raw.githubusercontent.com/tmastersmart/gmrs_live/main/install.php php install.php follow install prompts and See instructions here…
GMRSKurvey 10min node setup
https://www.youtube.com/watch?v=ciG2lgSYLq8 https://www.youtube.com/watch?v=oAdpg9gEadc
GMRS- 10 MINUTE NODE SETUP MADE EASY
https://www.youtube.com/watch?v=oAdpg9gEadc
DTMF commands for Allstar Nodes
*76 Disconnect from everything. *3<node#> example *31195 connects but wont reconnect if dropped.*73<node#> example *731195 connects and will auto reconnect if dropped*1<node#> example a node is connected to you node…